Centrifugal Constant Acceleration Tester
Product description
Centrifugal Constant Acceleration Tester (Arm Type) are used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7.
It is most suitable for testing electronic components or devices. Under high g effect on microcircuits, to check adaptability and reliability of wiring and the internal structures. It may expose mechanical and structural defects that are not found with vibration and shock tests.
Centrifugal Constant Acceleration Tester (Arm Type) are used to test articles under extreme acceleration conditions based on standard like MIL-STD-810F, MIL-STD-202 and IEC68-2-7.
It is most suitable for testing electronic components or devices. Under high g effect on microcircuits, to check adaptability and reliability of wiring and the internal structures. It may expose mechanical and structural defects that are not found with vibration and shock tests.
WE APPLY THE CONTROLLER DEVELOPED BY SANWOOD
parameter
Model | SM10-30 | SM10-50 | SM10-100 | SM10-100A | SM10-200 | SM10-500 | SM10-1000 | SM10-1500 |
Parameters | ||||||||
Max. Load (kg) / Position |
30×2 | 50×2 | 100×2 | 500×2 | 1000×2 | 1500×2 | ||
Acceleration (g) | 0.5~100 | |||||||
Acceleration Accuracy (%) | ±1 | |||||||
Max. Specimen Dimension (mm) |
300×300×300 | 400×400×400 | 500×500×500 | 700×700×700 | 1000×1000×1000 | 1200×1200×1200 | 1500×1500×1500 | |
Specimen Installed Radius (mm) |
1000 | 1200 | 1500 | 2250 | 2500 | 3000 | 6000 | 7500 |
Launch/Stop Time (Min) |
≤3 | ≤5 | ≤8 | ≤10 | ||||
Continues Working Time (min) | 60 | 30 | ||||||
Consumption Power (kVA) |
40 | 55 | 100 | 120 | 450 | 500 | ||
Inner Diameter of Foundation (mm) |
Φ3000 | Φ4000 | Φ4500 | Φ6000 | Φ7500 | Φ8500 | Φ15000 | Φ18000 |
Collector Ring | 60 rings 500V5A | |||||||
Weight (kg) | 2500 | 2800 | 3000 | 3500 | 6000 | 8000 | 15000 | 30000 |
Power Supply | AC380V±10%, 50/60Hz | |||||||
Measurement and Control System |
Automatic computer control and available with manual control | |||||||
Remarks | Collector ring and control accuracy can be configured in accordance with relevant standards or user requirements. | |||||||
Working Environment |
Temperature range 0~40℃, humidity ≤80% (no condense) | |||||||
Standards | MIL-STD-810F IEC68-2-7 |