Battery Dry Oven | Battery high temperature test

×
Battery Dry Oven 
BATTERY DRY OVEN
Reduce the drying treatment time
Battery Dry Oven

Battery Dry Oven

Application field
High temperature drying Oven can provide a stable test space for pre-heating, drying, changes about physics and chemistry testing . It supplies precision temperature controller with high stability of platinum resistance to temperature that makes temperature
well-distribution.

Characteristic
1. Continuous working time ≥1,000hours under the test condition of +140°C;
2. Equipped with an explosion-proof pressure relief port, when the pressure increases sharply, the pressure relief port automatically opens;
3. The smoke sensor detects the smoke or fire and active the fire extinguishing system to extinguish the fire in the oven;
4. Explosion-proof safety design, equipped with explosion-proof chains, glass explosion-proof film, insulation layer uses 100mm aluminum silicate insulation;
Structural Features

Structural Features

  • Interior material: SUS # 304 stainless steel plate (1.5 mm thickness ).
  • Exterior material: cold rolled steel, galvanized anti-rust treatment with advanced resin paint coating.
  • Insulation material: German Bayer fire-resistant high-strength PU polyurethane foam insulation material +ultra-fine glass fiber.
  • Heat preservation material: imported rigid rock wool rock wool (CSR 120 k).
  • In addition, in order to prevent glass frosting when running low temperature, we setup a heating wire inside to get it de-frosting.
  • Both sides of chamber are equipped with a test cable port with diameter 100mm, the silicon plug is with high low temperature resistance.
  • Heater: Fin type radiator pipe shaped stainless steel electric heater.

Main Fittings And Options

//v4-upload.goalsites.com/{
CO2 Protection System

CO2 Protection System

  • The system is equipped with a control unit, an alarm panel, an emergency button,a thermostat with dedicated temperature probe and a system with a CO2 fire extinguishing system;
  • The CO2 system is activated by exceeding a temperature threshold (settable by the user) measured by a dedicated PT100 or by exceeding the CO2 threshold inside the chamber;
  • The detection system, provided with its own power supply, activates the CO2 in the chamber;
  • Fire suppression systems inert atmosphere uses N2 or CO2 to eliminate Oxygen.
     
Electrical System

Electrical System

  • The overall layout of the circuit cabinet looks very neat and professional. Our circuits are arranged in accordance with UK standards and are equipped with complete circuit diagrams. Each line has a unique code, which is clearly defined and easy to locate for troubleshooting.
  • We use electrical components of world famous brands, such as Schneider from France,Carlo Gavazzi from Switzerland,Mitsubishi from Japan,Rainbow from Korea.
WE APPLY THE CONTROLLER DEVELOPED BY SANWOOD

WE APPLY THE CONTROLLER DEVELOPED BY SANWOOD

parameter

Model SM-G-225-DA SM-G-408-DA SM-G-1000-DA SM-G-1400-DA SM-G-1600-DA
Temperature range RT+10℃+300℃ (A: +25℃+200℃; B: +25℃+300℃)
Temperature fluctuation ±0.5℃
Heating rate 25.0℃100.0℃ within 8 minutes (6.0~10.0℃/min)
Temperature uniformity ±2.0℃ (25.0℃100.0℃)
±2.5℃ (100.1℃200.0℃)
Internal material Adopts 1.2mm thickness stainess steel (SUS304)
External material Adopts 1.2mm thickness cold-rolled steel sheet / powder spraying
Heat insulating material 100mm thickness mineral wool
Inner Size (mm) W*H*D 500*750*600 800*850*600 1000*1000*1000 1580*1400*640 1400*1800*650
Outer Size (mm) W*H*D 1000*1560*730 1200*1650*930 1400*1830*1230 1880*2050*800 2200*2100*1100
Volume (Customizable) 225L 408L 1000L 1400L 1600L
Power supply (Custom voltage) 380V AC  50/60Hz
Controller SANWOOD

Product Catalog:

Send us a Message

We will contact you within 24 hours