Battery Temperature Humidity And Vibration Testing
Application field
Battery temperature humidity vibration test chamber can perform reliability, identification and environmental stress screening tests for many industries such as electronics, automobiles and telecommunications.
Used for temperature control and cooling of the sample on the vibration table to provide transmission and rotation by three spatial axes.
The wall is flexible and insulated to compensate for the relative changes in the table movement and the volume of the chamber and to decouple the vibration of the components of the temperature control device for the volume of the chamber.
Test standards
TIEC 62660-2,SAE J2464,IEC 60086-4,UL 1642,UN 38.3,IEC 61960,IEC 62133,UL 2054, IEEE 1625,IEEE 1725.
Battery temperature humidity vibration test chamber can perform reliability, identification and environmental stress screening tests for many industries such as electronics, automobiles and telecommunications.
Used for temperature control and cooling of the sample on the vibration table to provide transmission and rotation by three spatial axes.
The wall is flexible and insulated to compensate for the relative changes in the table movement and the volume of the chamber and to decouple the vibration of the components of the temperature control device for the volume of the chamber.
Test standards
TIEC 62660-2,SAE J2464,IEC 60086-4,UL 1642,UN 38.3,IEC 61960,IEC 62133,UL 2054, IEEE 1625,IEEE 1725.
Features
- Equipped with equipment overload, overheat, abnormal power supply, overpressure, fault detection, etc. protective measures.
- The inner chamber material is made of SUS#304 stainless steel with a thickness of 1.2mm. The complete welded structure has very good sealing and is not easy to break.
- The insulation material is made of polyurethane foam with thickness of 100mm.
- The door seal adopts double silicon rubber sealing material.
- In addition, in order to prevent frosting on the observation window when running low temperature, we setup a heater inside to get it di-frosting.
- On the control panel has a lot of other function button, for example firefighting systems, gas detection, test load, release of CO2, exhaust.
Refrigeration System
- Temperature humidity and vibration test chamber, temperature rise or cooling capacity can be designed as high as 40C/min temperature change rate.
- Compressors equipped with world famous brand such as Tecumseh (France made), Bitzer or GEA BOCK (Germany made).
- Shock absorption and noise reduction process,slow down the vibration, protect the compressor.The new pipe bending technology: The bending process can minimize the connector point and make refrigerant flow more efficiently.
- It applies Denmark DANFOSS and Japanese SAGLNOMIYA solenoid valves to improve the overall reliability of the equipment.
- MP10 module has motor over-heating protection (with LED indicator), exhaust temperature over-heating protection (requires optional temperature monitoring probe and LED indicator), power indicator, alarm function.
Electrical System
- The overall layout of the circuit cabinet looks very neat and professional. Our circuits are arranged in accordance with UK standards and are equipped with complete circuit diagrams. Each line has a unique code, which is clearly defined and easy to locate for troubleshooting.
- We use electrical components of world famous brands, such as Schneider from France,Carlo Gavazzi from Switzerland,Mitsubishi from Japan,Rainbow from Korea.
WE APPLY THE CONTROLLER DEVELOPED BY SANWOOD
parameter
| Model | SM-MVH-500-CC | SM-MVH-1000-CC | SM-MVH-1700-CC | SM-MVH-3400-CC | |
| Temperature | Temperature control range | -70℃～180℃ （A:0℃～180℃;B：-20℃～180℃；C：-40℃～180℃; D:-70℃～180℃) | |||
| Temperature fluctuation | ±0.5℃ | ||||
| Cooling rate | 180.0℃～25.0℃ Cooling rate 2.0～3.0℃/min 25.0℃～-40.0℃ Cooling rate 1.0～2.0℃/min -40.0℃～-70.0℃ Cooling rate 0.7～1.5℃/min |
||||
| Heating rate | -70.0℃～180.0℃ Within 60 mins 3.0～5.0℃/min | ||||
| Temperature uniformity | ±1.5℃ (-40.0℃～100.0℃) | ||||
| ±2.0℃ (100.1℃～180.0℃or-40.0℃～-70.0℃) | |||||
| Humidity | Humidity control range | 20.0%RH～98.0%RH | |||
| Humidity fluctuation | ±1.0% RH | ||||
| Humidity uniformity | ±2.0％RH | ||||
| Material / components |
Internal material | Stainless steel(SUS304) | |||
| External material | Cold rolled steel sheet / powder spraying | ||||
| Heat insulating material | 100mm thickness polyurethane plate＋10mm thickness mineral wool | ||||
| Fan | Centrifugal blower | ||||
| Compressor | France Tecumseh, Germany Bock, Germany Bitzer | ||||
| Condenser | Air cooled,Water cooled | ||||
| Refrigerant | R404A、R23、R508 | ||||
| Evaporator | Fin - and - Tube Heat Exchanger | ||||
| Heater | Nickel chromium alloy heating wire | ||||
| Humidifier | Steam humidifier | ||||
| Size | Inner size(mm) W*H*D | 800*800*800 | 1000*1000*1000 | 1200*1200*1200 | 1500*1500*1500 |
| Volume（L) | 500L | 1000L | 1700L | 3400L | |
| Operating ambient temperature | +5 ~ 35℃ | ||||
| Power supply | 380V AC 50/60Hz | ||||
| Controller | South Korea TEMI-2700 | ||||
