Zero-distance Drop Test System
Product description
Small Drop Test System is suitable for free-fall test of small consumer electronics and components such as mobile phones, walkie-talkies, electronic dictionaries, CD / MD / MP3 and so on,applicable standards JISC 0044 and IEC 60068-2-32. Through standard tests on electronic products (surface drop, corner drop, edge drop, etc.) and collecting data, it simulates the vertical drop impact of electronic products during transportation and handling. It provides a basis for the design of the product's buffer and vibration damping and the selection of structural materials.
It can be dropped naked or dropped with packaging to evaluate the impact resistance or the damage caused by the fall of the product during transportation. It is an indispensable test method to improve the product's quality. It is applicable for electronic product research, development, quality control, manufacturing and other links.
Small Drop Test System is suitable for free-fall test of small consumer electronics and components such as mobile phones, walkie-talkies, electronic dictionaries, CD / MD / MP3 and so on,applicable standards JISC 0044 and IEC 60068-2-32. Through standard tests on electronic products (surface drop, corner drop, edge drop, etc.) and collecting data, it simulates the vertical drop impact of electronic products during transportation and handling. It provides a basis for the design of the product's buffer and vibration damping and the selection of structural materials.
It can be dropped naked or dropped with packaging to evaluate the impact resistance or the damage caused by the fall of the product during transportation. It is an indispensable test method to improve the product's quality. It is applicable for electronic product research, development, quality control, manufacturing and other links.
Features
-
Upper and lower displacement limit to guarantee safe.
-
The lifting height can be adjusted arbitrarily to meet the different requirements.
-
It can clamp and drop the test sample at any angle
-
Just place the machine on a flat marble or concrete floor, no special foundation needed
-
Remote control can be realized to ensure the safety of operators. (custom function)
-
Operating environment: temperature 0 ～ 40 ℃, humidity ≤80% (non-condensing)
-
Power supply: 2-phase AC220V 50Hz.
WE APPLY THE CONTROLLER DEVELOPED BY SANWOOD
parameter
| Model | SM11－100 | SM11－200 | SM11－300 | SM11－500 | SM11－800 | SM11－1000 | SM12-100 | SM12-200 |
| Parameters | ||||||||
| Max. Load (kg) |
100 | 200 | 300 | 500 | 800 | 1000 | 100 | 200 |
| Drop Height (mm) |
0～1200 | 0～1200 | 0～1200 | 0～1200 | 0～1000 | 0～1000 | 300～1500 | 300～1500 |
| Max. Specimen Size (mm) |
1000×1000×1000 | 1200×1200×1200 | 1300×1300×1300 | 1500×1500×1000 | 1600×1600×800 | 1800×1800×600 | 1000×1000×1000 | 1200×1200×1200 |
| Single Lift Drop Zone Size（W*D/mm） | 1000×1200 | 1000×1200 | 1000×1200 | 1200×1500 | 1200×1200 | 1400×1400 | ||
| Double lift Drop Zone Size（W*D/mm） | 1700×1400 | 1700×1400 | 1900×1600 | 2000×1800 | 2200×1900 | 2300×2000 | ||
| Test Mode | Face, Edge and Angle | |||||||
| Overall Dimension (mm) |
2000×1200× | 2100×1200× | 2200×1200× | 2500×1500× | 2000×1200× | 2200×1400× | ||
| 2000 | 2200 | 2300 | 2500 | 2600 | 2800 | |||
| Double lift Overall Dimension (mm) |
2050×1400× | 2050×1400× | 2250×1600× | 2350×1800× | 2550×1900× | 2650×2000× | ||
| 1615 | 1615 | 1615 | 1515 | 1400 | 1300 | |||
| Weight (kg) |
1700 | 1800 | 2000 | 2500 | 3000 | 3200 | 1500 | 2000 |
| Consumption Power (kVA) |
1.5 | 2 | 3 | 5.5 | 7.5 | 11 | 2 | 3 |
| Power Supply for Tester | AC220V±10%，50Hz | |||||||
| Power Supply for Air Source |
AC220V±10%，50Hz，3kVA /AC380V±10%, 50Hz，5kVA | |||||||
| Air Source Conditions | The output pressure is no greater than 1.0MPa, and air compressor is needed to be configured if there is no air source in the lab. | |||||||
| Working Environment |
Temperature range 0～40℃，humidity≤80% (no condense) | |||||||
| Standards | ISO2248-1985 (E) IEC68-2-27 | |||||||
