Sanwood Technology provide high quality humidity test chamber,If you are interested in humidity test chamber,You can browse related products and initiate consultations on our website.
When using the constant temperature and humidity test chamber, some customers feel that the power consumption is very high. In addition to the large equipment itself, which consumes more power compared to small equipment, it may also be due to the normal operating staff’s incorrect use concept and other aspects. Caused. So what is the reason that the constant temperature and humidity test chamber consumes a lot of electricity?
1. Placement: The constant temperature and humidity test box should be placed in a cool place to prevent dry and hot natural environment. When placing the equipment, leave a proper indoor space above and below the mechanical equipment to facilitate cleaning and heat dissipation. The higher the temperature of the natural environment around the device, the higher the power consumption and the higher the power consumption.
2. The tightness of the equipment sealing strip. If the sealing strip is deformed, it will endanger the degree of sealing of the closure, resulting in air-conditioning leakage and increasing power consumption.
3. The frost in the box is not cleaned up on time. After the equipment is used for a period of time, a lot of frost will form in the box. These frosts will endanger the actual cooling effect of the equipment, resulting in increased power consumption, and the use of electricity will cause the refrigeration compressor of the equipment. damage.
4. Open the tailgate of the equipment, causing the cold air to leak and the heat flow to invade the box. At this time, the refrigeration compressor needs to be restarted. During the test, try to avoid the frequency and time of opening and closing the door. The opening and closing action should be fast to prevent current damage.
5. The inside of the equipment needs to be cleaned in time. The surface of the refrigeration compressor and its cooler should be cleaned every 2 to 3 months. The larger the dust, the worse the actual effect of heat pipe heat dissipation. Just wipe with water.