In the process of using the salt spray test chamber, safety comes first, so what are the safety common senses of the salt spray test chamber? The following is a simple analysis.

1. The shell of the salt spray test chamber must be grounded during installation. If the test chamber is not grounded, there will be a risk of electric shock if the test chamber leaks. 

2.  Do not run the equipment before the equipment is installed, make sure that the installation is reliable before proceeding with the test. 

3. If heating samples are placed in the salt spray test box, please use an external power supply for the control power supply of the sample instead of directly using the power supply of this machine. 

4.  Dangerous current will be generated when the cabinet is running. Non-professionals should not open the cover of the electric control cabinet. 

5. When the machine is running, various motors and fans are started according to instructions under the control of the controller. Don't touch the components that are temporarily in a static state with your hands to prevent the components from starting suddenly and causing personal injury. It is really necessary to approach the rotating parts. Please cut off the power switch when working at the place and make sure that the protective device is intact. 

6. It is forbidden to move the salt spray test box when there is a sample inside, otherwise the sample may reverse or fall.

7. The salt spray test chamber must be installed horizontally, otherwise it will cause an alarm or unstable control. 

8.  Before use, make sure that the salt spray test box is fixed, that is, the casters are off the ground to adjust the foot to the ground, otherwise the test box will move unexpectedly when subjected to external force. 

9.  Please read the safety requirements in the manual and the safety signs on the equipment carefully before using the salt spray test chamber.